To film inside a manufacturing plant safely, treat the video crew like any outside contractor: a site orientation, the PPE each area requires, an escort, and clear rules for forklift traffic, lockout/tagout areas and hearing-protection zones. Protect confidential work with a written no-film list, an NDA and a review of every cut, and involve your export compliance officer if any line handles work controlled under the EAR or the ITAR. Then schedule around production: interviews away from the noise, people shots mid-shift, indoor drone routes cleared with your EHS lead, and a flicker test under your lights.
What plants film, and why
A plant shoot usually serves one or more of these jobs:
- Recruiting and culture. The floor, the shift and the people, for careers pages and job posts.
- Capability and brand films. Scale, equipment and quality systems for sales decks and the website.
- Trade show loops. Captioned edits that work with the sound off.
- LinkedIn and social. Short clips for buyers, engineers and candidates. Our guide to LinkedIn video covers formats and specs.
- Safety and training. Orientation, procedures and equipment walk-throughs.
Recruiting is the clearest case. Michigan had about 583,800 manufacturing jobs in September 2026, according to preliminary, seasonally adjusted Bureau of Labor Statistics estimates. In an April 2024 study, the Manufacturing Institute and Deloitte projected that U.S. manufacturers could need as many as 3.8 million additional employees between 2024 and 2033, and that 1.9 million of those jobs could go unfilled if skills and applicant gaps are not addressed.
Training video has limits. OSHA’s forklift standard lists video tape as one formal instruction method, but it also requires practical training and an evaluation of the operator’s performance in the workplace (29 CFR 1910.178(l)(2)(ii)).
Decide early which pieces are public. Recognition, safety and process videos often stay internal, and a corporate video crew can keep those cuts off public channels.
Safety: PPE, orientation and escorts
OSHA’s general PPE standard, 29 CFR 1910.132, requires employers to assess the workplace for hazards, select PPE that protects against them and fits each affected employee, and train employees to use it. Michigan runs its own OSHA-approved State Plan through the Michigan Occupational Safety and Health Administration (MIOSHA), which covers most private-sector workplaces in the state; its general industry standards include Parts 33 and 433 on PPE.
The standard is written as duties an employer owes its own employees, so the vendor equips and trains its crew while your plant sets the rules for its floor. Send PPE requirements by area, start the day with orientation, and assign an escort who can stop a take. Everyone on camera wears the posted PPE, crew included.
Forklifts and mobile equipment
OSHA requires aisles to be kept clear of hazardous obstructions and permanent aisles to be marked (29 CFR 1910.176(a)). Its forklift standard requires drivers to slow down and sound the horn at cross aisles and wherever vision is obstructed, and bars anyone from standing or passing under a truck’s raised portion. MIOSHA Part 21 covers forklifts in Michigan. On a shoot: no tripods, stands or cables in marked aisles, a spotter for anyone walking backward with a gimbal, and an agreed plan for when trucks pause or reroute.
Lockout/tagout zones
OSHA’s lockout/tagout standard, 29 CFR 1910.147, covers servicing and maintenance where unexpected startup or the release of stored energy could injure employees. Before energy is restored, the work area must be checked to ensure all employees have been safely positioned or removed. Michigan’s counterpart is MIOSHA Part 85. Treat any locked or tagged machine as a no-go zone; if you want lockout on camera for training, your EHS lead stages it.
Noise, hearing protection and audio
OSHA requires a hearing conservation program when employee noise exposure equals or exceeds 85 dBA as an 8-hour time-weighted average, and its noise overview says that if you need to raise your voice to talk to someone 3 feet away, the level might be over 85 dBA. Michigan’s standard is MIOSHA Part 380. Where hearing protection is posted, the crew wears it, and nobody on camera removes theirs for a sound bite.
So record interviews in a conference room or quieter bay, use the floor for b-roll and natural sound, and put a lavalier mic on anyone who speaks there. Caption every cut: in a 2021 post, LinkedIn said 79 percent of videos in its feed are watched with the sound off.
Confidentiality: the no-film list, NDAs and review
A wide shot catches more than anyone planned: scrap rates on a whiteboard, a customer’s part number on a rack tag, a line rate on an HMI screen. The fix is a written no-film list, agreed before anyone brings a camera, that usually covers:
- Proprietary processes, tooling, fixtures and prototypes
- Restricted areas and anything under NDA
- Screens, HMIs and whiteboards with production, quality or customer data
- ID badges and access-control hardware
- Customer parts, logos, part numbers and program names
- Anything export-controlled (see the next section)
Walk the route with the people who own that information and write the exclusions into the shot list. Have the vendor sign your NDA. Michigan’s Uniform Trade Secrets Act defines a trade secret partly by whether it is “the subject of efforts that are reasonable under the circumstances to maintain its secrecy.” A written list and a signed NDA document those efforts; your counsel can say what else applies.
Check purchase agreements for confidentiality or publicity clauses before a customer’s part or logo appears in public, and ask the customer when in doubt. Then agree who approves the edit (engineering, EHS, compliance, and the customer when its parts appear), how long reviewers have and where raw files are stored.
A simple test. If it would appear on an engineering drawing, a work instruction or a customer print, keep it out of frame until the person who owns it says yes.
Export controls: when footage becomes technical data
The Export Administration Regulations (EAR), issued by the Commerce Department’s Bureau of Industry and Security (15 CFR 730.1), define “technology” as information necessary for the development, production, use, operation, installation, maintenance, repair, overhaul or refurbishing of an item. A note to the definition in 15 CFR 772.1 says technology can take forms including photographs and “information revealed through visual inspection.”
The International Traffic in Arms Regulations (ITAR), administered by the State Department’s Directorate of Defense Trade Controls, define technical data as information required for the design, development, production, manufacture, assembly, operation, repair, testing, maintenance or modification of defense articles, including information in the form of photographs. The definition excludes basic marketing information on function or purpose and general system descriptions, which is not the same as showing how a part is made.
Two points matter on a shoot:
- Seeing can be a release. Both rule sets treat a foreign person’s visual inspection of items that reveals controlled information as a release (15 CFR 734.15; 22 CFR 120.56). Both definitions also name photographs as a form this information can take, so who sees the raw footage matters as much as who walks the floor.
- Publishing works differently. Under the EAR, unclassified technology made available to the public without restrictions is generally “published” and no longer subject to the EAR (15 CFR 734.7). The ITAR’s public-domain definition lists specific channels, and its catch-all, public release “in any form,” applies only after approval by the cognizant U.S. government department or agency (22 CFR 120.34).
If any line, room or program is export-controlled, put it on the no-film list by default and have your export compliance officer review the shot list, who will be on site and the edit before anything is shared. This is general information, not legal advice.
People on camera: releases, briefings and opt-outs
Get a signed release from anyone recognizable in a recruiting, brand or trade show video, including your own employees, on a form HR or legal owns. For people who speak on camera, a project release is cleaner than general onboarding consent.
Brief people beforehand on what is being filmed, where it will run and which areas and shifts are involved. Offer an easy opt-out and make it visible on the day: a colored sticker on a hard hat lets the crew frame around someone without singling them out. If someone changes their mind later, blur or cut them.
Michigan’s union membership rate is above the national average: an estimated 13.0 percent of the state’s wage and salary workers in 2025, against 10.0 percent nationally, according to the Bureau of Labor Statistics. In a represented plant, bring HR and labor relations in early, ask whether the contract or past practice addresses filming, and brief the steward before shoot day.
Drones and FPV inside the plant
The FAA says Part 107 “would not apply to operations conducted indoors,” and that its rules apply to operations outdoors in the National Airspace System. Inside a closed building, your site’s rules govern the flight. Once the drone exits through a dock door, it is flying outdoors and Part 107 applies.
Ask for a small drone with guarded or ducted propellers, built for flying indoors; our drone vs. FPV guide explains how these differ from camera drones. A sound indoor plan includes:
- A route approved with your EHS lead, with forklifts, cranes, conveyors and robot cells mapped
- A window when the route is clear, such as a break or a changeover
- Everyone on the route briefed, and anyone not in the shot kept out of the flight path
- A visual observer who watches the drone while the pilot flies in goggles and can call a stop
- A certificate of insurance that covers indoor flight
Outdoors, Part 107 requires unaided visual line of sight, kept by the remote pilot and the person flying or by a visual observer (14 CFR 107.31), so an FPV pilot in goggles needs an observer. It also bars flying over people who are not directly participating, unless they are under a covered structure or inside a stationary vehicle, or the flight meets an operations-over-people category (14 CFR 107.39). Our industrial drone video page covers airspace checks near Michigan plants.
Scheduling around production
- Mid-shift suits people shots: lines are steady and supervisors can spare a few minutes.
- Shift changes fill the aisles: fine for a shot of a crew arriving, bad for a drone or a moving camera.
- Changeovers and planned downtime can clear a route for FPV, but they are busy, safety-critical work. Film one only if your team wants it shown.
- Avoid customer audits, launches, inventory counts and month-end pushes.
- Interviews go between the loudest processes, in a reserved room.
Start with orientation, then shoot in the order that disturbs production least.
Lighting, color and flicker under shop lights
A Department of Energy explainer notes that fluorescent lamps on magnetic ballasts, and metal halide and high-pressure sodium lamps, changed output about 120 times per second, and that LEDs paired with the wrong driver can flicker as much as 100 percent, from on to fully off. On camera, that shows up as pulsing or rolling bands.
- Match the shutter to the power. On 60 Hz power, Nikon’s manual suggests 1/125, 1/60 or 1/30 second when its flicker reduction does not fix the problem.
- Test slow motion. Higher frame rates need faster shutter speeds, which makes flicker more likely. Test every frame rate you plan to use under each kind of fixture.
- Lock white balance. Dock doors, skylights and mixed fixtures can put different colors of light in one frame. Set it manually and keep it fixed for each setup.
- Light the faces. Bring LED panels for interviews, and ask before switching off or moving any plant lighting.
Pre-shoot checklist
A few weeks before the shoot, confirm:
- Purpose, channels, approver and which cuts stay internal
- No-film list written, walked and added to the shot list
- NDA signed, with raw-file storage and access agreed
- Orientation booked, PPE list sent by area, escort assigned
- Forklift routes, lockout areas and hearing-protection zones marked
- Releases, employee briefings, opt-outs and union contacts handled
- Indoor flight route approved, observer assigned, insurance certificate on file
- Shifts, breaks and changeovers on the schedule, interview room reserved
- Flicker and white balance tested under your lights
Our video production cost guide covers budgeting.
Brief
- Who: Communications or marketing lead, plant manager, vendor
- Decided: Purpose, audience, channels, approver
Walkthrough
- Who: Supervisor, EHS lead, vendor
- Decided: Route, shot locations, noise, traffic, light
No-film list and NDA
- Who: Engineering, quality, legal or export compliance
- Decided: What stays off camera, NDA terms, file handling
Safety plan
- Who: EHS lead, vendor, drone pilot
- Decided: Orientation, PPE by area, escort, no-go zones, flight plan
People
- Who: HR, supervisors, labor relations where there is a union
- Decided: Who appears, releases, opt-outs, notice
Shoot day
- Who: Escort, supervisors, crew
- Decided: Call times, shot order, who can stop a take
Review and release
- Who: Communications, EHS, compliance, customers whose parts appear
- Decided: Approved cuts, public and internal versions, archive
How we film inside plants
Our crew shoots video, photo and drone in the same visit. We agree a no-film list with you before every shoot, follow your site orientation and PPE rules on every visit, fly FPV routes from the dock door to the production floor, and keep internal videos off public channels when you need that. Our pilots hold FAA Part 107 remote pilot certificates. See manufacturing marketing for what we produce for plants, or request our current rates.